3D Innovations NC60 Refrigerator User Manual


 
Control Panel Messages
Chapter 5: Troubleshooting
5-5
FEED SP. FOLIO
IN MANUAL BYPASS
Load Sp. Folio (216 x 315 mm) paper in manual bypass.
FLUSHING
job filename
Printer is removing current job from memory. No action required.
H1-HARD DISK
ERROR
H1 - Hard disk error. Power printer off/on; check hard disk connections;
reformat disk.
H2-HARD DISK
CONTROLLER ERROR
H2 - Hard disk controller error. Power printer off/on; check hard disk
connections.
H3-HARD DISK
IS FULL
H3 - Hard disk is full. Print or delete any Secure Jobs or Proof Jobs.
H4-PLEASE FORMAT
HARD DISK
H4 - Please format the hard disk.
INITIALIZING
No action required.
J1-ADD YELLOW
TONER
Add yellow toner.
J2-ADD MAGENTA
TONER
Add magenta toner.
J3-ADD CYAN
TONER
Add cyan toner.
J4-ADD BLACK
TONER
J4 - Add black toner.
J5-REPLACE COLOR
DEV. CARTRIDGE
J5 - Replace the color developer cartridge.
J6-REPLACE BLACK
DEV. CARTRIDGE
J6 - Replace the black developer cartridge.
J7-REPLACE
TONER COLLECTOR
Replace the full toner collector.
Table 5.1 Control Panel Messages and Corrective Actions
Message Explanation/Required Action