Filter
Top Products
Adjusting Density and Color Balance
4-12
❖
DocuPrint NC60 System Administrator Guide
Making Adjustments
Use the following procedures to make adjustments to the
color density and balance:
Color Density Adjustment
1
Press Item Up or Item Down until you see:
2
Press Value Up or Value Down until you see:
Values are -3CMY, -2CMY, -1CMY, 0, +1CMY, +2CMY,
+3CMY..
3
Press Enter. The test page will print and the Control Panel
will display:
4
Enter “0” to set the current value or set another new value
by repeating Steps 2 and 3 above..
Color Adjust
Color Density
Color Density =
New Value
Color Adjust Menu
Color Density