Filter
Top Products
System Menu
1-38
❖
DocuPrint NC60 System Administrator Guide
Policy Timeout
Set how long the printer will wait
before taking the action defined by
the setting of Page Policy (page 1-37).
The available values, in seconds, are:
300
180
120
60
30*
0
Off
0
means immediately invoke Page
Policy.
Off
means never invoke Page
Policy (i.e., wait indefinitely).
1. Press
Menu Up
or
Menu
Down
until you see:
Menus
System Menu
2. Press
Item Up
or
Item Down
until you see:
System Menu
Policy Timeout
3. Press
Value Up
or
Value Down
until you see:
Policy Timeout =
New Value
4. Press
Enter
. You will see:
System Menu
Policy Timeout
5. Press
Online
. You will see:
Ready
Hold Timeout
Set the length of time a print job is to
be held at the printer when
designated as a Hold Job by the
printer driver.
The available values, in minutes, are:
10
5
4
3
2
1*
Off
The Control Panel display will indicate
“HOLD JOB” and the job filename.
The job will be released by pressing
the Enter key if the Hold Timeout
value has not been reached. If the
timeout value is exceeded, the job will
print.
1. Press
Menu Up
or
Menu
Down
until you see:
Menus
System Menu
2. Press
Item Up
or
Item Down
until you see:
System Menu
Hold Timeout
3. Press
Value Up
or
Value Down
until you see:
Hold Timeout =
New Value
4. Press
Enter
. You will see:
System Menu
Hold Timeout
5. Press
Online
. You will see:
Ready
Table 1.10 System Menu functions
(continued)
Menu Item and Function Keystrokes Display
Table1.10 Page4 of 7