Filter
Top Products
Novell Menu
Chapter 1: Configuring the Printer
❖
1-87
PServer Name
Set the name of the PServer in this
printer (a name of 1 to 47 characters
in length).
The available values are:
A - Z, 0 - 9, hyphen (-),underscore (_)
XRX_<macaddress>*
For this item (after Step 3),
Item Up
moves the cursor to the right through
the displayed PServer name and
Item
Down
moves the cursor to the left.
This allows you to change characters
within the string rather than having to
reenter the entire string.
With the cursor displayed under a
character,
Value Up
increments the
value of that character and
Value
Down
decrements the value.
1. Press
Menu Up
or
Menu
Down
until you see:
Menus
Novell Menu
2. Press
Item Up
or
Item Down
until you see:
Novell Menu
PServer Name
3. Press
Value Up
or
Value Down
.
You will see:
PServer Name =
xxx...xxx
4. Press
Value Up
or
Value Down
to change the value of the
character above the cursor. The
value is incremented or
decremented by 1 each time
the key is pressed. Holding
down
Value Up
or
Value
Down
causes continuous
scrolling through the values.
PServer Name =
xxx...xxx
5. To change other characters in
the PServer name, press
Item
Up
or
Item Down
to scroll
right or left respectively
through the character string,
then press
Value Up
or
Value
Down
to change the value of
the character above the cursor
(as in Step 4).
PServer Name =
xxx...xxx
6. When you have completed
setting the PServer Name,
press
Enter
. You will see:
Novell Menu
PServer Name
7. Press
Online
. You will see:
Ready
Table 1.17 Novell Menu functions
(continued)
Menu Item and Function Keystrokes Display
Table1.17 Page4 of 7