Filter
Top Products
Parallel Menu
Chapter 1: Configuring the Printer
❖
1-51
Table 1.13 Parallel Menu functions
Menu Item and Function Keystrokes Display
Port Enable
Enable or disable the parallel port.
The available values are:
On*
Off
1. Press
Menu Up
or
Menu
Down
until you see:
Menus
Parallel Menu
2. Press
Item Up
or
Item Down
until you see:
Parallel Menu
Port Enable
3. Press
Value Up
or
Value Down
until you see:
Port Enable =
New Value
4. Press
Enter
. You will see:
Parallel Menu
Port Enable
5. Press
Online
. You will see:
Ready
Port Timeout
Set the time for determining when to
end an incomplete print job and poll
the next port in the polling sequence.
The available values are:
5 - 300 seconds (
30*
)
This item also causes an implicit job
end such as Control D in PostScript or
<ESC> E in PCL, and invokes the
emulation functions associated with
this action (e.g., formfeed, reset, etc.).
The time changes incrementally by 1
second each time either
Value Up
or
Value Down
is pressed. Holding
down
Value Up
or
Value Down
causes continuous scrolling through
the values.
1. Press
Menu Up
or
Menu
Down
until you see:
Menus
Parallel Menu
2. Press
Item Up
or
Item Down
until you see:
Parallel Menu
Port Timeout
3. Press
Value Up
or
Value Down
until you see:
Port Timeout =
New Value
4. Press
Enter
. You will see:
Parallel Menu
Port Timeout
5. Press
Online
. You will see:
Ready
Table1.13 Page1 of 2