Filter
Top Products
Token Ring Menu
Chapter 1: Configuring the Printer
❖
1-79
Default Gateway
Set the four byte Default Gateway
address.
The available values are:
xxx.xxx.xxx.xxx
(where xxx = 000 to 255)
For this item (after Step 3),
Item Up
moves the cursor to the right through
the displayed Default Gateway
address and
Item Down
moves the
cursor to the left. This allows you to
change characters within the string
rather than having to reenter the
entire string.
With the cursor displayed under a
character,
Value Up
increments the
value of that character and
Value
Down
decrements the value.
This item appears only if
IP Address Res is set to
Static
.
1. Press
Menu Up
or
Menu
Down
until you see:
Menus
Token Ring Menu
2. Press
Item Up
or
Item Down
until you see:
Token Ring Menu
Default Gateway
3. Press
Value Up
or
Value Down
.
You will see:
Default Gateway=
xxx.xxx.xxx.xxx
4. Press
Value Up
or
Value Down
to change the value of the
character above the cursor. The
value is incremented or
decremented by 1 each time
the key is pressed. Holding
down
Value Up
or
Value
Down
causes continuous
scrolling through the values.
Default Gateway=
xxx.xxx.xxx.xxx
5. To change other characters in
the Default Gateway address,
press
Item Up
or
Item Down
to scroll right or left
respectively through the
character string, then press
Value Up
or
Value Down
to
change the value of the
character above the cursor (as
in Step 4).
Default Gateway=
xxx.xxx.xxx.xxx
6. When you have completed
setting the Default Gateway
address, press
Enter
. You will
see:
Token Ring Menu
Default Gateway
7. Press
Online
. You will see:
Ready
8. Restart printer or power off/on.
Table 1.16 Token Ring Menu functions
(continued)
Menu Item and Function Keystrokes Display
Table1.16 Page9 of 12