Filter
Top Products
20
Models 345, 346, 349, 355Important: To the Operator
041011
Screen C is SET CLOCK. Move the cursor under the
number you wish to change. Press the +++ key to
increase the number; press the - - - key to decrease
the number. When the desired time and date appears,
press the SEL key once to return to the OPERAT OR
MENU.
Note: The clock is programmed with military time.
SET CLOCK
14
:30 6/25/01
<-- --> +++ - - - SEL
This screen will appear if an invalid date is entered.
(example: If the date entered exceeds the days o f that
month.)
SET CLOCK
14
:30 02/31/01
INVALID DATE
SEL
This screen allows the D aylight S aving Time options.
DAYLIGHT SAVING TIME
ENABLE
DISABLE
<--- ---> SEL
If the Daylight Saving Time option is enabled, then the
time will be advanced by one hour at 2:00 a.m. on the
first S unday in April, and will be retarded by one hour
at 2:00 a.m. on the l ast S unday in October .
Screen D is MANUAL DEFROST. This screen allows
the operator to manually defrost theleftsideofthe
unit.
Place the cursor under YES, press the SEL key, and
the command will be executed.
MANUAL DEFROST
LEFT SIDE YES
NO
<--- ---> SEL
Repeat the procedure for the right side of the unit.
MANUAL DEFROST
RIGHT SIDE YES
NO
<--- ---> SEL
Note: The models 345 and 355 allow only one
freezing cylinder to be defrosted at a time. This applies
to freezing cylinder pairs on themodel 349. Attempting
to place a freezing cylinder into defrost while the other
freezing cylinder is defrosting will result in the following
screen. (Model 346 does not have this r estriction.)
ALREADY IN DEFROST
Press theSEL key to return the unit to the OPERATOR
MENU.
Screen E is SYSTEM INFORMATION. It consists of
6 display features.
Press the SEL key to adv ance to the next feature.
The first feature indicates the software version.
SYSTEM INFORMATION
355 CONTROL UVC2
VERSION 2.03
SEL