Filter
Top Products
32
Models 345, 346, 349, 355Operating P rocedures
Figure 43
Step 12
Install the mix feed tube into the mix inlet hole in the
bottom of the mix hopper.
Figure 44
Step 13
Sanitize and install the hopper cover. Lock the cover
into place. Attach the vinyl tube to the pressure relief
valve on the hoppercover. Position the open end of the
vinyl tube into the rear drip pan.
Figure 45
Step 14
Press the BEATER key. Agitate the solution in the
freezing cylinder for five minutes.
Figure 46
Step 15
With a pail beneath the door spout, open the draw
valve and drainall the solutionfrom the mix hopper and
the freezing cylinder. Press the OFF key and close the
draw valve.
Figure 47
Step 16
Disconnect the syrup connector in the sanitizing
solution.
RepeatSteps 2through14for the remainingfreezing
cylinder(s).
Step 17
Remove the right side panel and install the rear white
drip pan.