function unless SSH is also enabled.
o 'port <<1-65535>|default>' - Set the TCP port on which the
daemon should listen for SSH connections. The default is 22.
o 'public-key <operator|manager> KEYSTRING' - set a key for
public-key authentication. The KEYSTRING parameter must be
enclosed in quotes--either"KEYSTRING" or 'KEYSTRING'.
Newlines may be escaped with a backslash.
o 'ip-version <4|6|4or6>' - Select the IP mode to run in.
'ip-version 4' will only accept connections from IPv4
clients. 'ip-version 6' will only accept connections from
IPv6 clients. 'ip-version 4or6' accept connections from
both IPv4 and IPv6 clients. default is 'ip-version 4or6'.
o 'timeout <5-120>' - Set the maximum length of time in
seconds permitted for initial protocol negotiation and
authentication. The default is 120 seconds.
o 'cipher CIPHER' - Enable or disable the specied cipher.
By default, all available ciphers are enabled.
o 'mac MAC' - Enable or disable the specied mac. By default,
all available macs are enabled.
Next Available Options:
■ filetransfer -- Enable/disable secure file transfer capability.(p. 299)
■ port -- Specify the TCP port on which the daemon should listen for SSH connections.(p. 305)
■ public-key < manager | operator > -- Configure a client public-key. (NUMBER) (p. 306)
■ timeout < 5 to 120 > -- Specify the maximum length of time (seconds) permitted for protocol
negotiation and authentication. (NUMBER) (p. 311)
■ cipher < aes128-cbc | 3des-cbc | aes192-cbc | ... > -- Specify a cipher to enable/disable.(p. 296)
■ mac < hmac-md5 | hmac-sha1 | hmac-sha1-96 | ... > -- Specify a mac to enable/disable.(p. 304)
standard
■ [no] ip access-list standard
Congure a standard Access Control List.
Next Available Options:
■ name -- Specify name of Access Control List to configure. (ASCII-STR) (p. 304)
■ number < 1 to 99 > -- Specify Access Control List to configure by number. (p. 305)
start-seq-num
■ ip access-list resequence NAME < 1 to 2147483647 >
Specify the starting sequence number.
Range: < 1 to 2147483647 >
Next Available Option:
■ increment < 1 to 2147483646 > -- Specify the increment. (p. 301)
310© 2009 Hewlett-Packard Development Company, L.P.
ipCommand Line Interface Reference Guide
