ProCurve(cong)# write memory
ProCurve(cong)# reload
COMMAND DETAILS
terminal (p. 95)inactivity-timer (p. 94)baud-rate (p. 93)
local-terminal (p. 94)events (p. 93)
screen-refresh (p. 94)flow-control (p. 93)
baud-rate
■ console baud-rate < speed-sense | 1200 | 2400 | ... >
Usage: console baud-rate <speed-sense|1200|2400|4800|
9600|19200|38400|57600|115200>
Description: Set the data transmission speed for the device connect
sessions initiated through the Console port. The 'speed-sense'
is for automatic speed determination. Default is speed-sense.
Supported Values:
■ speed-sense
■ 1200
■ 2400
■ 4800
■ 9600
■ 19200
■ 38400
■ 57600
■ 115200
events
■ console events < None | Debug | All | ... >
Usage: console events <none|all|not-info|critical|debug>
Description: Set level of the events displayed in the device's Events Log.
all - display all;
none - display no events;
not-info - display all events except informational;
critical - display only critical-level events;
debug - reserved for Internal use.
Supported Values:
■ None
■ Debug
■ All
■ Not-INFO
■ Critical
flow-control
■ console flow-control < XON/XOFF | None >
Usage: console ow-control <xon/xoff|none>
Description: Set the Flow Control Method; default is xon-xoff.
Supported Values:
93© 2009 Hewlett-Packard Development Company, L.P.
consoleCommand Line Interface Reference Guide
