configuration
■ show instrumentation monitor configuration
Usage: show instrumentation monitor conguration
Description: show congured thresholds for monitored parameters.
shows the parameter name and the congured threshold
value for all parameters.
If instrumenation monitoring for the particular paramter
is disabled then threshold for the particular parameter is
displayed as 'Not Monitored'.
connection-rate-filter
■ show connection-rate-filter
Usage: show connection-rate-lter [all-hosts] [blocked-hosts] [throttled-hosts]
Description: List the ports and the on/off connection-rate-lter status and
sensitivity.
Parameters:
o all-hosts - Display the IP addresses of the hosts that are blocked
and throttled
o blocked-hosts - Print the IP addresses of the hosts that are currently
blocked
o throttled-hosts - Print the IP addresses of the hosts that are currently
throttled
Next Available Options:
■ all-hosts -- Show blocked and throttled IP addresses.(p. 529)
■ blocked-hosts -- Show blocked IP addresses.(p. 534)
■ throttled-hosts -- Show throttled IP addresses.(p. 599)
console
■ show console
Usage: show console
Description: Show serial link/console settings.
counters
■ show ipv6 mld vlan VLAN-ID counters
Show MLD VLAN counter information.
cpu
■ show cpu
Usage: show cpu [<1-300>]
[slot <SLOT-LIST> [<1-90>] ]
Description: Show average CPU utilization over the last 1, 5, and 60 seconds;
or the number of seconds specied.
543© 2009 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide
