Filter
Top Products
13
ASSEMBLING YOUR BREVILLE DUAL DISC JUICE PROCESSOR™
Before First Use
Before using your Dual Disc Juice
Processor™ for the first time, remove and
safely discard any packaging material and
promotional labels. Ensure the power cord
is unplugged.
Wash the Filter Bowl Surround, Juice Disc,
Puree Disc, Puree Insert, Juicer Cover,
Food Pusher, Juice Jug, Juice Jug Lid and
Pulp Container in warm soapy water with
a soft cloth or nylon brush. Rinse and dry
thoroughly.
For Use With Juice Extractor
Place the motor base on a flat dry surface
such as a bench top. Ensure that the
motor base is switched OFF at the control
panel then unplug the cord.
Step 1
Place the Filter Bowl Surround on the top
of the Motor Base.
Step 2
Align the arrows on the Juice Disc with the
arrows on the Motor Drive Coupling and
push down until it clicks into place. Ensure
the Juice Disc is fitted securely inside the
Filter Bowl Surround and onto the Motor
Base.
Step 3
Place the Juicer Cover over the Filter Bowl
Surround, positioning the Juicer Cover
over the stainless steel filter disc and lower
into position.