Filter
Top Products
19
OPERATING YOUR BREVILLE DUAL DISC JUICE PROCESSOR™
With Juice Extractor or
Puree Extractor
Step 1
Wash your selection of fruit and/or
vegetables to prepare them for juicing.
Step 2
Based on the type of fruit or vegetable you
are juicing/pureeing select either the Juice
Extractor or the Puree Extractor.
Warning: Do not put hard fruit and
vegetables (ie. Carrots, apples,
fresh beetroot, etc.) or ice through
juicer when using Puree Extractor.
This could damage parts of
the unit.
Step 3
Ensure the Dual Disc Juice Processor™
is correctly assembled – see previous
instructions. Ensure the Juice Extractor
or Puree Extractor is thoroughly cleaned
before each use (refer to cleaning on
pages 26-27). Ensure you place the
Juice Jug (or glass) under spout before
commencing juicing.
Step 4
Plug the power cord into a 110/120V
power outlet. The light surrounding the
‘Start | Stop” button will illuminate.
NOTE:
The light will be illuminated for 2
minutes before fading into sleep
mode. The light will come back on by
activating any of the controls.
Step 5
Use the speed selector table as a guide for
juicing different fruit and vegetables. Push
the “Start | Stop” button and the unit will
automatically start.
Step 6
With the motor running, place food into the
Feed chute Using the Food Pusher, gently
guide food down the Feed Chute. Do
not exert excess pressure. To extract the
maximum amount of juice, always push
the Food Pusher down slowly.
Step 7 – Using The Juice Extractor
As fruits and vegetables are processed
juice will flow into the juice jug and the
separated pulp will accumulate in the
Pulp Container.
The Pulp Container can be emptied during
juicing by turning the Dual Disc Juice
Processor OFF at the control panel and
then carefully removing the Pulp Container.
Replace the empty Pulp Container into
position before continuing to juice.
NOTE:
Do not allow the Pulp Container to
over fill as this may affect the operation
of the appliance.
!