Filter
Top Products
20
OPERATING YOUR BREVILLE DUAL DISC JUICE PROCESSOR™
Step 8 – Using The Puree Extractor
When using the Puree Extractor puree will
flow into the juice jug. There will be no pulp
extracted into Pulp Container.
NOTE 1:
SELF-RESET OVERHEATING
PROTECTION
The Breville Dual Disc Juice Processor™
also fitted with a self-resetting safety
device which safeguards against
overheating on the motor with excessive
loads. If overheating occurs, the
juicer will automatically activate the
overheating protection device and
the motor will switch itself off. If this
occurs, the light surrounding the Start/
Stop button will flash red. When the
overheating protection is activated,
unplug the juicer from power outlet for
at least 15 minutes to allow the unit to
cool. Then plug juicer into the power
outlet and use as normal.
NOTE 2:
ELECTRONIC PROTECTION
The Breville Dual Disc Juice Processor™
will automatically stop operating if the
motor is stalled. This is an electronic
safety feature. Either too much food
is being processed at one time or
the pieces are not small enough. Try
trimming food, cutting food into smaller
pieces of even size and/or processing a
smaller amount per batch.
If this occurs, the light surrounding the
Start/Stop button will flash red.
To continue juicing, turn the power OFF
at the power outlet, clear the feed chute,
finally turn the appliance back on by
pressing the Start/Stop button
to “ON”.
NOTE 3:
OVERLOAD PROTECTION BUTTON
The Breville Dual Disc Juice Processor™
is fitted with a safety device which
safeguards against overloading with
excessive loads. If this occurs, juicer
will automatically activate the overload
protection button and the unit will
switch itself off.
If this occurs, remove the plug from the
outlet and allow the unit to cool. Then
press the Overload Protection Button
found on the bottom of the Motor Base.
The safety device will then be reset and
the Breville Juice Processor is ready for
use again.