Filter
Top Products
16
ASSEMBLING YOUR BREVILLE DUAL DISC JUICE PROCESSOR™
For Use With Puree Extractor
Place the motor base on a flat dry surface
such as a bench top. Ensure that the motor
base is switched OFF at the control panel,
then unplug the cord.
Step 1
Place the Filter Bowl Surround on the top
of the Motor Base.
Step 2
Place the Puree Disc into the Filter Bowl
Surround and onto the Motor Drive
Coupling Push down until it clicks into
place. Ensure the Puree Disc is fitted
securely inside the Filter Bowl Surround
and onto the Motor Base.
NOTE:
Never use Puree Disc without
Puree Insert. They must always be
used together.
Step 3
Place the Puree Insert into the Filter Bowl
Surround, making sure the warning label
on the handle is facing upwards.
Step 4
Place the Juicer Cover over the Puree
Insert and Filter Bowl Surround and lower
into position.