C H A P T E R 1
Welcome
5
Speakers
The speakers transmit audio from remote participants during a meeting. The room
system’s audio-processingfeatures eliminate echos and in-room audio feedback.
The speakers are installed on eitherside of the interactive flat panels.
Video connection harness for guest laptops
The video connection harness enables users to connect their laptops to theroom system using
either VGA or HDMI connectors. When a user connects his or herlaptop, the laptop’s video
output appears on an interactive flat panel and is shared with remote participants.
The video connection harness’s connectors are typically located on the meetingroom table.
Table microphone upgrade kit
A table microphone upgrade kit is available for room systems forsmall rooms.
This upgrade kit enables you to use table microphones rather than the camera-
integrated microphones forspecialised or challenging room configurations. The
upgrade kit includes two table microphones, an audio processor and
accompanying cables.
Accessories
Accessories forthe SMARTRoomSystem include thewall standkit and table microphones.
N OT E
For accessory part numbers andordering information, referto the specifications (see
Specifications on page 7).
Wall stand kit
The wall stand kit includes a wall stand foreach interactive flat panel in
your room system and the cable tracking. Thewall stand transfers
some of the weight from the wall to thefloor and is required for metal
stud walls that can’t support the full weight of theinteractive flat panel.
The cable trackingcovers cables running across the floorfrom the
interactive flat panels to the meeting room table.
Table microphones
Medium and large rooms comewith two table microphones. You can purchase
and connect up to three additional table microphones if needed for a total of up to
five table microphones.