Filter
Top Products
C H A P T E R 3
Configuringyour room system’ssoftware
13
2.
Press the Input Select button on the interactive flat panel’s front control panel until the
input source isHDMI 3/PC.
N OT E
In large room installations, set the input source to HDMI3/PC for both interactive flat
panels.
The Lync appliance starts and completes the first-run installation process. During this
process, the Lync appliance restarts several times.
N OT E
This process takes time to complete. Duringthis process, displays might not change
content or might appear blank forseveral minutes.