Sterling A0567659 Blender User Manual


 
Page 110 of 118 SGB Batch Blender with Mitsubishi
Controller
box.
2. The current settings for that hopper will be
shown.
3. Make the necessary adjustments and select a new
feeder to configure if desired.
4. Hit “Done” to exit.
Alarm This screen shows the last 100 stored alarms. The log
Log can be viewed and cleared.
Programmable Features (continued)
After all selections are made:
Keep pressing the “Done” key until the unit returns to the
Recipe menu.
Important! Programmable features should not be accessed by
inexperienced operators or inexperienced plant
personnel. Unauthorized changes may prevent the
blender from operating properly and may void part or all
of the warranty.
Call the Sterling Service Department for assistance or
for further explanation of these or any other
programmable features, which may or may not be
shown in this manual.
Select a Feeder to
Configure
Change the Alarm
Silence Delay
Enable or Disable
Retries
Enable or Disable
Alarms
Go back to Setup
Directory
Clear Alarm
Log
Alarm Log
Go back to
Setup
Directory
Scroll Through
Alarm Log