Filter
Top Products
Page 70 of 118 SGB Batch Blender with Mitsubishi Controller
can be scrolled to read “NAT” (natural), “RGD” (regrind), or “ADD”
(additive). The selected label will be displayed for the ingredient hopper
with an arrow next to the abbreviation.
Component #3 is designed to handle regrind and most models
come equipped with a larger, square gate to reduce the likelihood
of bridging. If regrind is being used, it should always be run
through component #3. If you don’t have regrind, another major
ingredient can be run through component #3.
The ingredient labels (names) selected will be displayed on the recipe
menu so the operators will know what material is being blended. The
natural or virgin (component #1) ingredient will not be shown on the
recipe menu.
If additive is designated, the weighed ingredient will be metered as a
percentage of the natural or virgin.
If regrind is designated (component #3), the ingredient will be metered
as a percentage of the total batch. It is assumed the regrind has been
generated from pre-blended production, and already contains the same
color and/or additives.
Please see next page for example calculations (setup).