Filter
Top Products
SGB Batch Blender with Mitsubishi Controller Page 5 of 118
Safety Considerations
Sterling equipment is designed to provide safe and reliable
operation when installed and operated within design
specifications, following national and local safety codes.
To avoid possible personal injury or equipment damage when
installing, operating, or maintaining this equipment, use good
judgment and follow these safe practices:
; Follow all SAFETY CODES.
; Wear SAFETY GLASSES and WORK GLOVES.
; Disconnect and/or lock out power before servicing or
maintaining the blender.
; Use care when LOADING, UNLOADING, RIGGING, or
MOVING this equipment.
; Operate this equipment within design specifications.
; UNPLUG OR OPEN, TAG, and LOCK ALL DISCONNECT
DEVICES before working on equipment. You should remove
the fuses and carry them with you.
; GROUND your equipment properly before applying power.
; Use extreme caution when working with your equipment.
Keep body parts, tools, clothing, and debris away from
vacuum inlets and moving parts.
; Do not jump or bypass any electrical safety components.
; Do not restore power until you remove all tools, test
equipment, etc., and the blender and related equipment are
fully reassembled.
; Only PROPERLY TRAINED personnel familiar with the
information in this manual should work on this equipment.