Sterling A0567659 Blender User Manual


 
SGB Batch Blender with Mitsubishi Controller Page 31 of 118
normal operation of the machine.
Some of the safety devices utilize a manual activator. This is the method
of initiating the safety lock out. This may be in the form of a plug,
disconnect plug, lever or a handle. Within this lockable handle, there may
be a location for a padlock. Personnel servicing the equipment should
place a padlock in the lockout handle.
WARNING! Always disconnect and lockout all electrical power and pneumatic
(i.e. compressed air) sources prior to servicing or cleaning any
Blend and Reclaim blender, including all SGB units. Failure to do
so may result in serious injury.
At no time must anyone remove the lockout or reconnect the twist
plug, other than the person who installed the lockout or who
unplugged the twist plug.
2-8-5 Lock-Outs, Plugs, and Other Safety Devices
The SGB blending system utilizes several types of safety devices.
The Line Cord Plug
This line cord plug allows the operator or maintenance personnel to
unplug the blending system from its power source and tag it out. This
plug may be tagged with any number of approved electrical lockout tags.
These tags are available at most electrical supply stores.
WARNING!
Disconnect both of these items to ensure optimum maintenance
personnel safety when cleaning or servicing this equipment.