Filter
Top Products
6
3-SAFETY (continued)
2011 July
700r-NA
Figure 3-4
3.3 Table of Warnings
• To reduce the risk associated with
mechanical and electrical hazards:
− Read, understand, and follow all safety
and operating instructions before operating
or servicing the case sealer.
− Allow only properly trained and
qualifi ed personnel to operate and service
this equipment.
WARNING
• To reduce the risk associated with
hazardous voltage:
− Position electrical cord away from foot
and vehicle traffi c.
WARNING
• To reduce the risk associated with
pinches, entanglement and
hazardous voltage:
− Turn electrical and air supply off and
disconnect before performing any
adjustments, maintenance or servicing
the machine or taping heads.
WARNING
• To reduce the risk associated with
pinch and entanglement hazards:
− Do not leave the machine running
while unattended.
− Turn the machine off when not in use.
− Never attempt to work on any part of
the machine, load tape, or remove
jammed boxes from the machine while
the machine is running.
WARNING
Figure 3-2
Figure 3-3