Filter
Top Products
18
6.1 Uncrating
The envelope attached to the shipping box contains
the uncrating instructions of the machine (Figure 6-1).
Cut straps. Cut out staple positions along the
bottom of the shipping box (or remove staples
with an appropriate tool - Figure 6-2).
After cutting out or removing the staples, lift the
shipping box in order to clear the machine
(two persons required).
Transport the machine with a fork-lift truck to
the operating position. Lift the pallet at the point
indicated in Figure 6-3
(weight of machine + pallet = See Specifications).
2011 July
700r-NA
6-UNPACKING
6.2 Disposal of Packaging Materials
The 700r package is composed of:
- Wooden pallet
- Cardboard shipping box
- Wooden supports
- Metal fi xing brackets
- PU foam protection
- PP plastic straps
- Dehydrating salts in bag
- Special bag of laminated polyester/aluminium/
Polyethylene (sea freight package only)
- Polyethylene protective material
For the disposal of the above materials, please follow
the environmental directives or the law in your country.
Figure 6-1
Figure 6-2
Figure 6-5
Figure 6-3
A package is located under the machine body.
Retrieve the instruction manual for additional
procedures of the setup. The package also
contains parts removed for shipping, spare parts
and tools (Figure 6-5).
Figure 6-4
Removal of Pallet
Using a 10mm combination wrench, remove the
fasteners that secure the case sealer legs to pallet at
each leg (as shown in Figure 6-4).