Filter
Top Products
53
2011 July
700r-NA
Figure 14-2
Figure 14-1
14-ADDITIONAL INSTRUCTIONS 15-ENCLOSURES / SPECIAL INFO.
14.1 Information for Disposal of Machine
The machine is composed of the following materials:
- Steel structure
- Nylon rollers
- Drive belts in PVC
- Nylon pulleys
For machine disposal, follow the regulations
published in each country.
14.2 Emergency Procedures
In case of danger/fi re:
Disconnect plug of power cable from power supply.
(Figure 14-1)
IN CASE OF FIRE
Use a fi re extinguisher containing CO2 (Figure 14-2).
15.1 Statement of Conformity
See Section 1.1.
15.2 Emission of Hazardous Substances
Nothing to report
15.3 List of Safety Features
List of components/assemblies with safety
functions
- LATCHING EMERGENCY STOP BUTTON
- Thermal cut-out relay
- Fixed guards upper drive belts
- Blade guard assemblies on both taping heads
- Important: Install earth wire protection on
electrical installation.
All safety features/components must be explained
and highlighted to all operators and to the person
responsible for spare parts in order to ensure that
these components are always on hand or ordered
as a priority procedure.
ONLY USE ORIGINAL REPLACEMENT PARTS
15.4 Copies of Test Reports,
Certifications (etc.)
Required by User
Electrical tests
1 - Earth continuity
2 - Insulation resistance
3 - High voltage test
Reference; EN60204-1 par. 20.2.,3.,4.