Filter
Top Products
57
2011 July
700r-NA
16-TECHNICAL DOCUMENTATION AND INFORMATION (continued)
16.3 Spare Parts Order
Order parts by quoting the following information:
(Refer to the Identifi cation Plate on the Machine)
• MACHINE MODEL
• SERIAL NUMBER
• FIGURE NO.
• POSITION
• 3M PART NO. (11 DIGITS)
• DESCRIPTION
• QUANTITY
Important!
The machine is constantly revised and improved by our designers. The spare parts catalogue is also periodically
updated. It is very important that all the orders of spare parts make reference to the serial number of the machine
(located on the identifi cation plate on the machine).
The manufacturer reserves the right to modify the machine at any time without notice.
It is suggested that the following spare parts be ordered and kept on hand.
700r
Qty. 3M-Part Number Description
2 78-8070-1531-4 Belt-Drive W/Hook
(See Manual 2 / Taping Heads)
Replacement Parts Ordering Information and Service
Refer to the fi rst page of this instruction manual "Replacement Parts and Service Information".
Tool Kit
A tool kit, part number TBA, is available as a stock item. The kit contains the necessary
open-end and hex socket wrenches for use with the metric fasteners on the case sealer. The threading tool,
part number 78-8076-4726-4, contained in above kit is also available as a replacement stock item.
Refer to Manual 2 for recommended taping head spare parts.
Labels
In the event that any labels are damaged or destroyed, they must be replaced to ensure operator safety.
See Section 3 - Safety.