Filter
Top Products
288 Chapter 5
Language Reference
[:SENSe]:EMI Subsection
Setting the Dwell Time for Peak
[:SENSe]:EMI:MEASure:DETector:PPEak:DWELl<time>
[:SENSe]:EMI:MEASure:DETector:PPEak:DWELl?
Sets the dwell time for the peak detector for Measure at Marker, Automeasure, and
Remeasure.
Factory Preset
and *RST: Off
Remarks: Sets the dwell time
Setting the Dwell Time for Quasi Peak
[:SENSe]:EMI:MEASure:DETector:QPEak:DWELl<time>
[:SENSe]:EMI:MEASure:DETector:QPEak:DWELl?
Sets the dwell time for the quasi-peak detector for Measure at Marker,
Automeasure, and Remeasure.
Factory Preset
and *RST: Off
Remarks: Sets the dwell time
Setting the Dwell Time for Average Peak
[:SENSe]:EMI:MEASure:DETector:AVERage:DWELl<time>
[:SENSe]:EMI:MEASure:DETector:AVERage:DWELl?
Sets the dwell time for the average detector for Measure at Marker, Automeasure,
and Remeasure.
Factory Preset
and *RST: Off
Remarks: Sets the dwell time
Preselector Centering On or Off (E7403A, E7404A, E7405A only)
[:SENSe]:EMI:MEASure:PCENter[:STATe] OFF|ON|0|1
[:SENSe]:EMI:MEASure:PCENter[:STATe]?
Determines if preselector centering should be performed prior to Measure at
Marker, Automeasure, and Remeasure.
Factory Preset
and *RST: Off
Remarks: Available on Agilent E7403A, E7404A, and E7405A only.