Filter
Top Products
Adding Layer 3 IP Policies
EncrypTight User Guide 195
Adding a Mesh Policy
In a mesh network, any network or network set can send or receive data from any other network or
network set.
Figure 74 Mesh network example
The PEP for each network in Figure 74 encrypts data sent to networks A, B, C, or D and decrypts data
from networks A, B, C, or D.
When you create a policy for a Mesh network, you must select at least two network sets.
To add a new mesh policy:
1 From the Policy view, right-click anywhere in the Policy view and click Add Mesh Policy.
2 Double click the new policy name added to the policy list.
3 Create the policy in the Mesh Policy editor as described in Table 49. The policy editor is shown in
Figure 75.
4Click Save when complete.