Filter
Top Products
Certificate Implementation Errors
EncrypTight User Guide 251
To disable strict authentication on ETEPs:
1 Connect to the serial port of the appliance and open a terminal session.
2 Log in and type
configure to enter configuration mode.
3Type
management-interface to enter management interface configuration mode.
4 Enter
strict-client-authentication disable.
For example:
admin> configure
Entering configuration mode...
config> management-interface
Entering management interface configuration mode...
man-if> strict-client-authentication disable
For more information about using the strict-client-authentication command, see the CLI User
Guide for the ETEP.
NOTE
For information on enabling strict authentication and using certificates, see “Using Enhanced Security
Features” on page 261.