Filter
Top Products
Factory Defaults
EncrypTight User Guide 339
Factory Defaults
ETEMS’s factory settings are listed by appliance model and software version for the following categories:
● Interfaces
● Trusted Hosts
● SNMP
● Logging
● Policy
● Advanced
● Features
● Hard-coded Settings
Interfaces
Hash algorithm HMAC-SHA-1
PFS Diffie-Hellman group 5
Lifetime One hour
Negotiation mode Main mode
Table 109 Interfaces defaults
Interfaces Default Setting
Appliance Identification
Remote user password Not applicable
Appliance name model number_version (e.g., ET0100A_ETEP1.6)
Throughput speed Undefined
Management
IPv4 address Undefined
Subnet mask 255.255.255.0
IPv4 default gateway None
Natted IP address Undefined
IPv6 address Undefined
IPv6 default gateway Undefined
Flow control Negotiated
Link speed Negotiated
Remote
Transparent mode Enabled
IP address Undefined
Subnet mask 255.255.255.0
Table 108 IKE Phase 2 Parameters
Parameter Value