Filter
Top Products
6 - 8 PANELWARE MMI Application Manual for GE Fanuc Genius Protocol - June 1995 GFK-1115
6
Main Menu
If the demo project has been successfully downloaded to the Panel and if you have started the
Panel in Run-Mode, the main menu appears (This is the same as the Startup Picture):
The date and time are displayed in the top right-
hand corner of the menu. The F1 to F4 entries
provide information about the functions assigned
to keys F1 to F4. These key LEDs (F1 through
F4) are illuminated on the Keyblock module, as
well, as shown below:
Use function keys F1 – F4 to change to another picture:
F1 Changes to the INPUT VALUES picture.
In this picture, you can enter or change two values of different types, which are
then displayed in two output fields.
F2 Changes to the INPUT PASSWORD picture.
You can use this picture to enter a password and its function.
F3 Changes to the KEY FUNCTIONS picture.
The keys can be assigned with certain functions so that locations in the PLC
memory can be influenced immediately.
F4 Changes to the ACTIVE ALARM LIST picture.
Displays a list of all active alarms.