Filter
Top Products
3 - 40 PANELWARE MMI Application Manual for GE Fanuc Genius Protocol - June 1995 GFK-1115
3
Section 11 Compiling the Project
In order to create, transfer and run your project on the Panel, it must be compiled (translated).
To compile the example project, select the Compile option from the F3 Utilities pull-down menu
or press Ctrl + Q:
The compilation procedure status messages are displayed in the Project Compiler window that is
displayed. If the project is compiled successfully, the following message is displayed:
The amount of memory the project will occupy in the user memory (user Flash) in the Panel is
also displayed.
Press Esc to close the Project Compiler window and return to the Main menu.