Filter
Top Products
6 - 62 PANELWARE MMI Application Manual for GE Fanuc Genius Protocol - June 1995 GFK-1115
6
Genius Internal Connection
To display the Genius Internal variables used in your project, move the cursor in the connection
list to the connection GI — GENIUS — Genius Internal and press F5 VAT or ↵↵:
If you have made all entries correctly If you have made all entries correctly, your screen should
look like the screen shown above. Compare the variable names and the corresponding Panel data
types. If the variable assignment table is different from the one above, make the required changes.
Possible errors and their corrections are:
• Wrong Name:
Change the address in the respective picture/field.
• Wrong Panel Data Type:
You have used a field with the incorrect data type in a picture. Delete the field and its entry in
the VAT and then insert the desired field.
Every variable must be assigned to a PLC address and a PLC variable type now. A detailed
explanation is provided in chapter 5. Assign following PLC addresses to the symbolic names:
Symbolic Name Panel Data Type
PLC Address
PLC Variable Type
GLB_BIT_01 Byte unsigned
GQ0001
BIT
By pressing the F10 Exit function key, or the Esc key, the VAT is closed for the Genius Internal
connection.