Filter
Top Products
GFK-1115 Chapter 6 Demo Project 6 - 39
6
● Confirm your entry with F4 Accept. The key function is inserted and indicated by the
character T:
● Move the cursor to key F2 now. Perform those steps described again. Enter
DATE_SET/DI
for the Tagname and a 1 again for the Value 1.
● Press F4 Accept to confirm and save this entry and then press F10 to close the LED/Key
Functions window. The main PCS menu appears again.
7. Now, the LED functions have to be defined.
● Function keys F1, F2 and F4 are all assigned LED function Key-LED switched on.
● A description of LED function assignments for the individual keys can be found in step 5
under “Main Picture” (see page 6-26)
8. Save the picture under the name
CLOCK
:
● Press Esc or F10 Exit.
● PCS warns you that the picture is not yet saved.
● To save the picture, enter
Y
.
● Enter the name
CLOCK
in the Save Picture window and press the ↵↵ key. The picture is
saved and the main menu appears again.