Filter
Top Products
GFK-1115 Chapter 4 Configuring Communication with the PLC 4 - 3
4
PLC Types
Every Genius connection must be configured to specify a PLC Type. Except for the case of the
PCS-created DD GENIUS default connection, this PLC type must be provided when inserting a
new connection. For the DD GENIUS default connection, the PLC type must be provided before a
successful project compilation can occur.
In either case, a PLC Type selection window is accessed when editing the Connection Definition.
Table 4-1 summarizes the types of data that can be accessed for each PLC type.