Filter
Top Products
GFK-1115 Chapter 6 Demo Project 6 - 41
6
● Enter the following parameters for the password input field:
Character Size:...................................
2
Number of Digits: ..............................
6
Destination Tagname:........................
PASSWORD
Tagname for Completion: ..................
COMPLETE
Value for Completion:........................
100
Echo Character: .................................
*
Number of Password Levels: ..............
4
Password for Level #1:.......................
7748
Password for Level #2:.......................
6586
Password for Level #3:.......................
612674
For Number of Password Levels, 0 also counts as a level. (0= no/wrong password.)
Tip
Instead of defining a number combination, as was used in the demo project, you can define a
password from any combination of letters, numbers and/or other characters.
● Press F4 Accept after the parameters have been entered. The input field for the password
is inserted into the picture:
4. Insert the output field for the active password level in cursor position (37,5). Output field
Output Bit/Byte
Position:.............................................37,5
Number of Digits: ..............................3
Places after dec. point: .......................0
Character Size:...................................1
Field Width:.......................................3
Tagname:...........................................PASSWORD
Display leading zeros? (Y/N): ............No
Scaling? (Y/N):..................................No
5. The next step is to define the LED functions.
● Function keys F1 and F4 will be assigned LED function Key LED Switched on. These
keys are used to switch to another picture.
● The method used in assigning LED functions to certain keys is described in step 5 under
the “Main Picture” on page 6-26.
6. Save the picture under the name PASSWORD.