Filter
Top Products
6 - 22 PANELWARE MMI Application Manual for GE Fanuc Genius Protocol - June 1995 GFK-1115
6
Defining Key Assignments
1. Select the Keyboard function from the Edit menu.
2. Define function keys F5–F8 now. This is started by moving the cursor to the respective key.
3. Press F4. A small window appears in the lower right-hand corner of the screen, in which the
function number of the key can be entered (e.g.:
5
).
4. Confirm the entry by pressing ↵↵. The respective key assignment is then indicated by F05. The
key assignments should now look like this:
5. It is not necessary to define control keys for this demo project the default definitions will be
used.
6. Leave the Edit Keyboard Table window by pressing F10 Exit.