Filter
Top Products
Problem Possible cause Remedy
Dishes, cutlery and
glasses are not dry
or are flecked.
The amount of rinse aid may
be insufficient, or the rinse
aid reservoir empty.
Replenish the reservoir,
increase the dosage or
change the brand of rinse
aid (see "Before using for the
first time: Rinse aid").
Crockery was taken out of
the cabinet too soon.
Leave it in for longer. See
"Operation".
Combination products have
been used which have
impaired drying
performance.
Change your detergent, or
replenish the rinse aid (see
"Before using for the first
time - Rinse aid").
White residue is
visible on cutlery
and crockery,
clouding occurs
on glassware; film
can be wiped off.
Not enough rinse aid was
used.
Increase the dosage (see
"Settings menu, Rinse aid").
There is no salt in the salt
reservoir.
Fill the salt reservoir (see
"Before using for the first
time - Filling the salt
reservoir").
An unsuitable combination
detergent has been used.
Change your detergent. Use
a standard liquid, tablet or
powder detergent, and fill
the salt and rinse aid
reservoirs in the dishwasher.
The water softener is
programmed to a setting
which is too low.
Select a higher water
softener setting (see "Water
softener").
Problem solving guide
58