5. BASE SPECIFICATIONS PARAMETERS
II - 28
# Items Details Setting range (unit)
1050
(PR)
MemPrg Not used.
1051
(PR)
MemTol Not used.
1052
(PR)
MemVal Not used.
1060 SETUP Activate setup
processing
Execute the functions required for initializing the system.
1: Execute one-touch setup
#(1060) Data( 1)( )
"BASE PARA. SET? (Y/N)" is displayed.
To initialize the parameters.
The parameters are initialized according to
the setting values in #1001 to #1043.
To retain the current parameters.
"FORMAT?(Y/N)" is displayed.
To initialize the machining program
file and tool offset file.
The above files are initialized and the standard
canned cycle program is input.
To retain the current machining
program file and tool offset file.
"SETUP COMPLETE" is displayed.
INPUT
INPUT
INPUT
INPUT
INPUT
N
N
Y
Y
Note: Most setup parameters will be initialized with
one-touch setup‚ so confirm the data before
executing.
This parameter will automatically be set to 0 when the
power is turned ON.
1
