5. BASE SPECIFICATIONS PARAMETERS
II - 73
# Items Details Setting range (unit)
1287
(PR)
ext23
(bit0)
Workpiece
coordinate
display
Select the mode of displaying the workpiece
coordinate counter.
0: Don’t update the display immediately after
workpiece coordinate data is changed.
1: Update the display immediately after
workpiece coordinate data is changed.
0/1
ext23
(bit3)
Counter display
expanded
function
selection
0: Display the command value that does not
consider the tool length offset amount or
workpiece coordinate offset amount.
1: The counter display expanded function is
validated. (bit4 to bit7)
0/1
ext23
(bit4)
Relative
coordinate
display
(M system)
0: Display the actual position including tool
length offset.
1: Display the machining position in terms of a
program command excluding tool length
offset.
(L system)
0: Display the actual position including tool
shape compensation.
1: Display the machining position in terms of a
program command excluding tool shape
compensation.
0/1
ext23
(bit5)
Relative
coordinate
display
(M system)
0: Display the actual position including tool
radius compensation.
1: Display the machining position in terms of a
program command excluding tool radius
compensation.
(L system)
0: Display the actual position including nose R
compensation.
1: Display the machining position in terms of a
program command excluding nose R
compensation.
0/1
