A SERVICE OF

logo

Open as PDF
next previous
6. AXIS SPECIFICATIONS PARAMETERS
6.1 Axis Specifications Parameters
II - 86
# Items Details Setting range (unit)
2010
fwd_g
Feed
forward
gain
Set up a feed forward gain for pre-interpolation
acceleration and deceleration.
The larger the set value, the smaller the theoretical
control error will be. However, if a mechanical vibration
occurs, the set value must be reduced.
0 to 100 (%)
2011 G0back G0
backlash
Set up the backlash compensation amount when the
direction is reversed with the movement command in
rapid traverse feed mode or in manual mode.
−32768 to 32767
2012 G1back G1
backlash
Set up the backlash compensation amount when the
direction is reversed with the movement command in
cutting mode.
−32768 to 32767