5. BASE SPECIFICATIONS PARAMETERS
II - 71
# Items Details Setting range (unit)
1274
(PR)
ext10
(bit7)
Word range
check
Select whether to check that the operation
expression of the word date in the program is
enclosed in brackets ( [ ] ) when the machine
program is executed.
This check is also applied to the 08000 to 09999
and the machine manufacture macro program.
0: Check valid
1: Check invalid
0/1
1275
(PR)
ext11 Not used.
1276
(PR)
ext12 Not used.
1277
(PR)
ext13
(bit0)
Tool life
management II
count type 2
Specify how and when the mount or use count is
incremented in tool life management II.
0: Type 1
The count is incremented when the spindle is
used for cutting.
1: Type 2
The count is incremented for the tool used or
mounted for one program. The increment is
enabled by resetting.
0/1
(Default: 0)
1278
(PR)
ext14
(bit0)
Program restart
method selection
Select the program restart method.
0: Type A
1: Type B
0/1
1279
(PR)
ext15
(bit1)
Interrupt amount
during machine
lock
Select the manner to handle the interruption
amount during machine lock.
0: Cancel when reset.
1: Do not cancel when reset. Instead cancel
during manual zero point return.
0/1
ext15
(bit2)
Selection of
cutting start
interlock target
block
Select whether the cutting start interlock is valid for
successive cutting blocks.
0: Valid for successive cutting blocks.
1: Invalid for successive cutting blocks.
0/1
1280
(PR)
ext16 Not used.
