A SERVICE OF

logo

2. MACHINING PARAMETERS
2.1 Process Parameters
II - 6
<SPLINE> (High-accuracy spline)
# Item Contents Setup range (unit)
8025 SPLINE ON
(for M system only)
Not used.
8026 CANCEL ANG.
(for M system only)
Not used.
8027 Toler-1
(for M system only)
Not used.
8028 Toler-2
(for M system only)
Not used.
8029 FairingL
(for M system only)
Not used.
8030 MINUTE LENGTH
(for M system only)
Not used.
<Fairing>
8033 Fairing ON
(for M system only)
Not used.
8034 AccClamp ON
(for M system only)
Not used.
8035 AccClampMag Not used.
8036 CordecJudge
(for M system only)
Not used.
8037 CorJudgeL
(for M system only)
Not used.
<C axis normal line>
# Item Contents Setup range (unit)
8041 C-rot.R Not used.
8042 C-ins.R Not used.