Filter
Top Products
12
PAge heAder.....
ASSEMBLY & OPERATION
USING THE FOOD
PROCESSOR BOWL
Attaching gearbox to food processing
bowl lid
1. Place the gearbox into the food
processor lid, it will click into place.
2. To attach the motor click it into place on
the gearbox.
To attach the food processing bowl, food
processor attachments and lid
1. Remove the food processing bowl
from the storage unit and place onto a
counter-top or table ensuring that the
surface is clean and level.
2. Choose one of the following food
processor attachments:
a) S Blade™
b) Adjustable slicer
c) Reversible shredder
3. There is a common spindle that is
used across all of the three food
processor attachments.
When using the reversible shredder
1. Place the spindle into the center of the
food processing bowl.
CAUTION
Caution should be taken when
handling the shredding disc.
2. Holding the reversible shredding disc,
notice that there is a side for coarse
shredding and a side for fine shredding.
Place the side you require up. Align the
hole in the center of the disc with the
spindle and ensure that it is pushed
down firmly.