Breville BSB530XL Mixer User Manual


 
5
BREVILLE RECOMMENDS SAFETY FIRST
5
• Always assemble processing bowl
lid and insure it is locked into place
before use.
• If food becomes lodged around the
processing blades or in the blade guard,
release the trigger switch and unplug the
cord. Use a spatula to dislodge the food.
Do not use fingers as the blades
are sharp.
• Do not remove the immersion blender
from ingredients during operation.
Ensure the appliance is off and has
stopped before removing, to avoid
contact with moving blades or whisk.
• While processing food to reduce the risk
of severe injury to persons or damage
to the appliance a spatula may be used,
but must be used only when the food
processor is not running.
• Do not leave the immersion blender
unattended when in use.
• To protect against electric shock do not
immerse the motor body, cord or power
plug in water or any other liquid.
• Keep the appliance clean. Follow the
cleaning instructions provided in
this book.
• Do not use the immersion blender with
wet hands.
• Do not push food into the feed chute
with your fingers or other utensils.
Always use the food pusher provided.
• Keep fingers, hands, knives and other
utensils away from moving blade
and discs.
• Do not place hands or fingers in the
processing bowl of the food processor
unless the motor, processing blades
or disc have come to a complete stop.
Ensure the trigger switch has been
released to turn the motor off and the
power cord is unplugged from the power
outlet before removing the lid from the
processing bowl.
• The BSB530XL includes several
attachments. The rating for this
appliance is based on the immersion
blending leg and food processor
attachments which draw the greatest
load. Other included attachments may
draw significantly less load during
their use.
• The appliance is also fitted with a
polarised plug (one blade is wider than
the other). To reduce the risk of electric
shock this plug will fit in a polarised
outlet only one way. If the plug does not
fit, contact a qualified electrician. Do not
modify the plug in any way.