Filter
Top Products
14
PAge heAder.....
ASSEMBLY & OPERATION
When using the S Blade™
1. Using care, hold the S Blade™ in one
hand, with the other hand, place the
spindle through the center of the S
Blade™ from underneath. The blade
should self-locate at the base of the
spindle. The blade will sit loosely on the
spindle but will lock into place during
processing.
CAUTION
Caution should be taken when
handling the S Blade™ as the blades
are extremely sharp.
2. Place the S Blade™ and spindle into the
center of the food processing bowl.
3. Align and lock the processing bowl lid
into place.
Once the blade or disc has been selected
for the food processor and you have
assembled as listed in the previous
instructions, you can now process food.
Place the ingredients inside the processing
bowl or in the feed chute (depending on the
task). Do not exceed the maximum (MAX)
marking. Insert the gear box into the lid of
the food processor.
NOTE
Always place the S Blade™ into the
food processor prior to placing the
food into the food processor. If using
the adjustable slicer or the reversible
shredding disc, you are able to
assemble the processor before adding
ingredients to the bowl. Ingredients
used with these discs will need to
be added through the small or large
feed chute. Some foods, such as nuts,
can stop the S Blade™ from engaging
the built in safety mechanism. If you
have difficulty closing the lid with
ingredients such as these we advise
to load them through the feed chute
after the processor has been fully
assembled.