Filter
Top Products
17
PAge heAder.....
BEFORE FIRST USE
Remove any packaging material and
promotional labels. Wash blade and two
parts of the mashing leg before use.
CAUTION
Never immerse the motor body or
gearbox in water or any other liquid.
ASSEMBLY OF THE MASHING LEG
1. Hold the outer leg and insert the
gearbox making sure ALIGN arrows are
aligned.
2. Hold both outer leg and gearbox firmly
with one hand and insert inner leg until
it clicks into place.
ASSEMBLY & OPERATION
3. Holding gearbox twist outer leg to lock.
4. Align the mashing leg with the motor
body and push the two parts together
until it clicks.
5. Place blade on underside of the mashing
head. To lock the blade rotate in a
counter-clockwise direction. Blade will
not attach if the leg is not attached to
the motor body.