Filter
Top Products
15
PAge heAder.....
ASSEMBLY & OPERATION
5. When processing has finished turn the
motor off by releasing the trigger switch
and remove the power plug.
6. Detach the motor from the gear box
and remove the lid from the bowl (refer
to instructions). Carefully remove the
food processing disc or S Blade™ and
use a spatula to remove any excess food
from the discs or blades and to remove
processed food from the bowl.
NOTE
When processing food through the
feed chute(s) you must keep pressing
the trigger switch in order to keep the
motor on.
TO DETACH THE FOOD
PROCESSING BOWL AND LID
Ensure the trigger switch is released and the
appliance is unplugged.
Hold the motor body with one hand and
using thumb and finger of the other hand,
press on the two EJECT buttons on either
side of the motor body. Pull the motor
body away from the processing bowl
gearbox to detach.
TO USE THE FOOD PROCESSOR
For food preparation tips and recipes refer to
the recipe section of this booklet.
1. Insert the plug into a 110/120V outlet.
2. Select a speed between 1–15 on the
speed control dial.
3. Press the trigger switch to turn
the appliance on and start the
processing action.
4. Feed the food through the feed chute
of the food processor, using the food
pusher to push it down.