Filter
Top Products
124
8
8
Figure 26
Figure 27
There are two types of Oil Gard systems in use:
• Start Sense
• Run Sense
Identification
Start Sense is designed to prevent the engine
from starting if the oil level is too low. It will not
start an engine that is already running.
Run Sense will stop a running engine if the oil
level runs below the ADD level on the dipstick.
The engine can be restarted, but will only run
briefly.
Troubleshooting
In engines equipped with a Start Sense system,
if the engine will not start, check oil level and
bring level to FULL. If engine still does not start,
disconnect lead at the oil fill plug/terminal. If
engine starts, the module is faulty, or the internal
crankcase float is sticking. Clean or replace parts
as necessary.
In engines equipped with a Run Sense system, if
the engine halts during operation, or will not
remain running upon starting, check oil level. if
oil level is at FULL and engine continues to halt,
the module is faulty or the internal crankcase
float is sticking. Clean or replace parts as
necessary.
Type of
Starter
Lead Wire Colors
Rewind Gray/Gray
Ye l l o w / B l a c k
Electric Ye l l o w / Ye l l o w
Type of
Starter
Lead Wire Colors
Rewind Gray/Black
White/Gray
Electric Gray/Black
White/Gray