Filter
Top Products
Chapter 4 Command Reference
*EMC <NRf>
(Enable Macro Command)
4-126 Programming Guide
*EMC <NRf>
(Enable Macro Command)
*EMC?
(Enable Macro Query)
*EMC <NRf>
*EMC?
Sets or queries the Enable for defined macros.
Macro definitions are not affected by this command. One use of this command is
to turn off macro expansion in order to execute an instrument-specific command
with the same name as a macro.
The value of the numeric parameter determines whether the defined macros are
enabled or disabled. A value that rounds to an integer value of zero disables any
defined macros. A value that rounds to an integer value not equal to zero enables
any defined macros.
-32767 to +32767
1
• Single ASCII-encoded byte, 0 or 1.
• A value of zero indicates that macros are disabled and a value of one indicates
that macros are enabled.
• *RST: 0 (disabled)
• This value is unaffected by save/recall.
• Macros are disabled at power-on.
<NRf> Range
<NRf>
Resolution
Query Response
Comments