Filter
Top Products
Chapter 2 Command Summary
Front Panel to SCPI Command Maps
Programming Guide 2-7
Instrument Control, Utility, Recall, and Save & Print Keys to
SCPI Command Map (Cont.)
1 a. *IDN?
b. No command
c
1
. [:SENSe]:ROSCillator:SOURce INTernal
c
2
. [:SENSe]:ROSCillator:SOURce EXTernal
c
3
. [:SENSe]:ROSCillator:SOURce:AUTO ON
d. No command (see Calibration menu, Figure 2-6)
e. No command
f. No command
g. *TST?
h. :SYSTem:COMMunicate:SERial:TRANsmit:BAUD <numeric_value>
I. :SYSTem:COMMunicate:SERial:TRANsmit:PARity[:TYPE]
EVEN | ODD | NONE
j. :SYSTem:COMMunicate:SERial:TRANsmit:PACE XON | NONE
k
1
. :SYSTem:COMMunicate:SERial:CONTrol:DTR LIMit
k
2
. :SYSTem:COMMunicate:SERial:CONTrol:DTR IBFull
k
3
. :SYSTem:COMMunicate:SERial:CONTrol:DTR ON
l
1
. :DISPlay[:WINDow]:TEXT:RADix DPOint
l
2
. :DISPlay[:WINDow]:TEXT:RADix COMMa
2 *SAV <Nrf>
3 :INITiate:CONTinuous OFF (if running)
OR
:ABORt (if single measurement in progress)
4 *RCL <Nrf>
5 :HCOPy:CONTinuous ON | OFF
6 :INITiate:CONTinuous ON (if in single)
OR
:ABORt (if running)
7 :INITiate[:IMMediate]
Figure 2-2. Instrument Control, Utility, Recall, and Save & Print Keys
to SCPI Command Map (Part 2 of 2)